High temperature maintenance | It is urgent to protect new energy power



In high temperature and hot summer, pay attention to heat prevention

Saying goes"Small heat and big heat, steaming and cooking"

A new energyMixer trucksHigh temperature maintenance checklist

Please check~

01Power battery scientific management

//

When charging, avoid high-current fast charging, and it is recommended to use an intelligent charging system to automatically adjust the charging power according to the battery temperature to prolong the battery life. At the same time, try to charge in a cool place to avoid direct sunlight that may cause the battery to overheat

//

Regularly inspect the battery pack and connecting wiring harness to ensure that there is no loosening or corrosion, and keep the surface of the battery pack clean to avoid the accumulation of dust and debris affecting heat dissipation

02The cooling system is meticulously maintained

//

Regularly inspect the cooling system to ensure that the coolant is sufficient (the level is not lower than the minimum scale) and that the circulation is smooth

//

Regularly inspect the air outlet and radiator of the battery pack fan to prevent dust coverage or impurities from blocking the heat dissipation effect

03Mixing drum and transmission system Meticulous maintenance

//

After work, be sure to thoroughly clean the inside of the mixing drum with coarse stones and clean water to drain the stagnant water and prevent corrosion and agglomeration caused by concrete residues. At the same time, check whether there is excessive wear and damage to the raceway of the mixing drum, and apply grease in time to ensure the smooth operation of the mixing drum

//

Check whether the flange nut and universal joint of the transmission shaft are loose, and if they are loose, they should be tightened or replaced in time. Grease the flange nut and universal joint once a month to ensure that the transmission system runs flexibly. At the same time, check whether the mixing drum has abnormal sound and loosening phenomenon to ensure that the mixing drum runs smoothly

04Tyre & Brake System Safety Check

//

The high temperature in summer tends to increase the tire pressure, increasing the risk of puncture. It is recommended to check the tire pressure regularly, keep it within the normal range, and avoid long-term high-speed driving and hard braking to reduce tire wear and overheating

//

In hot weather, the brake fluid is easy to evaporate to form air resistance, resulting in brake failure. Regularly inspect the braking system to ensure that the brake fluid is adequate and of acceptable quality. When the brake hub is found to be hot, the mixer truck should be stopped in time to cool down, but do not use physical cooling methods such as pouring cold water

As an industry-leading green transportation tool, Sany New Energy Electric Mixer Truck is particularly important for high-temperature maintenance! Through scientific management and meticulous maintenance, we can ensure that the mixer truck can still work stably and efficiently in a high temperature environment, jointly protect the green power, and enjoy the fun of summer!