The most popular 200t truck crane in 2024, the old driver is full of praise for experiencing the first shift

If we talk about the most eye-catching and popular models in 2024, the STC2000C8-8 is undoubtedly one of them, which opens up a new world of 200t products with new ideas, and realizes the use of an automobile crane chassis on this tonnage for the first time, which is sought after by users with high performance and low cost, and is popular all over the country.

As soon as the first one in Lanzhou was delivered, Master Ma drove the car to the chemical plant, and hoisted dozens of large and small pieces of equipment for four consecutive days. Even if there are full working conditions, only one pallet truck is needed, if there are workers to assist in disassembling and assembling the weight very quickly, even if there are no workers, it is very easy for the pallet truck driver to assist in the collection of the truck. ”

Xue Haifu, general manager of Lanzhou Haihong Machinery Construction Co., Ltd., who purchased this car, said: "There are many chemical plants under construction in Lanzhou New Area, and the demand for lifting and lifting equipment is quite large, and the existing equipment can no longer meet the development needs of our enterprise STC2000C8 s. ”

"I also did a lot of understanding before buying it, and this car sold well in other places, especially in developed areas. Compared with all-terrain, the cost of the car chassis is lower, but the performance is not inferior, and the payback cycle is shorter, which is especially critical in today's highly competitive market environment. Now that our country's manufacturing level is getting higher and higher, 200 ton truck cranes are likely to become the mainstream choice in the future, replacing all-ground. At present, Lanzhou New Area is only my STC2000C8-8, and only by laying out in advance can the follow-up development take the lead. ”

Master Ma said: "The current crane is getting easier and easier to drive than before, more and more intelligent, and the control and micro-movement are more accurate. Driving comfort has also been improved a lot. Like the 2000C8-8, with rear-wheel steering, the turning radius is much smaller and very convenient; secondly, the direction is very light, just like driving a car, it is easy to turn around and rub the steering wheel with one hand; There is also a large screen that is also very easy to use, very smart and convenient. ”

STC2000C8-8

Scatter the overlord, think about what you think

• 90m main arm + 17.5 sub-arm, optional 2*9.5m extension arm. The 220-ton super-large cross-section main arm, the maximum lifting weight of the full extension arm is 7.3t, and the farthest lifting of the full extension arm is 2t@70m and 1.1t@76m;
• 61t counterweight, can be moved back 1000mm, lifting main configuration + jacking additional counterweight, easy to disassemble and assemble, can be transferred with the vehicle with 31 tons of counterweight, application of sub-counterweight self-disassembly and assembly technology, farewell to the "small schoolbag", counterweight disassembly and assembly without auxiliary crane;
• The tires are all 445/95R25, and the outrigger span is 8.3 (5.5) × 7.7m;
• The Dongkang diesel engine on the car is not on the road National IV, and is exempt from urea; Get off the Weichai diesel engine; The effective volume of the fuel tank is 450L, the 12-speed Fast gearbox is equipped with a synchronizer;
• Electronically controlled power pump + electronically controlled main valve, Hande axle;