2016 Shanghai Bauma Exhibition Sany "hot models" are counted one by one

As a grand event in the construction machinery industry, Bauma Shanghai has attracted major brands in the industry, global agents, professionals and construction machinery enthusiasts to participate in the exhibition. As a benchmark enterprise of "Made in China", the popularity of the Sany exhibition area is overwhelming, with orders of nearly 200 million yuan on the first day and nearly 100 units of various types of equipment sold. Among them, SY full range of heavy-duty excavators, SCC6500A crawler cranes, C10 rotary drilling drills and other models have become the "hot models" of the Bauma Exhibition with both popularity and volume.

Sany PALFINGER Straight Arm Crane SPS8000HT

The dark horse of the exhibition has a number of patents, and one machine is multi-purpose

Orders have been received for 18 units to enter the markets of Japan, Russia and Southeast Asia

 

The truck crane is a subversive product, which has been greatly improved, including the lightweight design of the turntable, with a total weight of about 1.2 tons, which is basically the lightest in the world. According to Zhou Xianhua, deputy director of the product development department of Sany PALFINGER, the winch is replaced from the inside to the outside, which is the world's 5656 model of this design, and has a portable latch, which cancels the complicated bolt method in the past. And the use of one-hand remote control of the main valve, is also the domestic * 5656 times with one-hand remote control control.

 

The car is equipped with an aerial work bar, because the car was originally a crane, considering that some customers need to do some simple maintenance, there is no need to rent other equipment, to play a multi-purpose machine. In addition to this, it is equipped with forks, drills, grabs. Forks are mainly used for dismantling and transportation of high-rise exterior walls; The drill bucket is used to drill holes, and the grab can catch sand, silt, etc., and the stacked arm drill is equipped with a grab to realize the simple function of a small excavator.

 

The portable remote control is a new mode that frees up labor and allows for one-handed operation.

 

According to Manager Lu, the angle of the crane can reach -25 degrees, and there are manufacturers doing this in China * 5656 times, and the normal crane * can do it horizontally, the product can reach a negative angle, and 13 patents have been submitted.

 

Comments:Sany Palfic self-designed. The components are refined and fine, and one machine is multi-purpose to meet the various needs of customers and save customer costs.

 

C10 series rotary drilling drill

The national three engines are environmentally friendly and efficient, and a large order of 100 million yuan has been signed before the launch

 

Sany's all-new model, the C10 seriesRotary drilling rigs"Win the market with the core advantages of high stability, high reliability, high efficiency and strong rock entry". On the morning of November 20, the day before the Shanghai Bauma Exhibition, there was good news from Sany Heavy Machinery. On the morning of the same day, the 2016 Beijing Pile Driver C10 series global launch conference was successfully held, and more than 50 international customers from 11 countries participated in the release ceremony. thereintoCustomers from Russia, Brazil, Malaysia, Thailand and Bangladesh signed 16 sets of equipment on site, with a total transaction amount of nearly 100 million yuan.

 

The rotary drilling rig unveiled at this exhibition is led by SR405RC10, and the C10 series has further strengthened its construction capacity compared with the previous C8 series, mainly due to the strong "heart" - Isuzu efficiency engine. The aircraft adopts the national III. emission EFI engine, which has strong power, reduced fuel consumption and strong adaptability.

 

The powerful power of the C10 series is one of the distinctive features of the engine. Taking the comparison of the old and new products as an example, the new SR265C10 VS the old SR250: The torque of the new power head of the C10 series has been increased from 250kN·m to 265kN·m; Engine power increased from 250kW to 257kW; The main winch speed increased from 63m/min to 80m/min; The drilling depth of the machine lock rod was increased from 54m to 58m; The drill depth of the friction rod was increased from 69m to 72m. The whole machine is more powerful and the operation efficiency is higher.

 

In order to ensure the reliability of the engine, the C10 series adopts a three-stage fuel filtration system, with a filtration accuracy of 3μm and a purity filtration efficiency of 99.99%, ensuring high adaptability to oil products.

 

Power head configuration: As the leading edge of rotary drilling operation, the power head has been upgraded to the fifth generation, with higher speed and higher efficiency. The C10 series drill bit adopts the multi-gear control technology of the first in, which can not only ensure more efficient drilling, but also ensure that the energy consumption will not be wasted too much; In order to ensure a more accurate verticality of the borehole, the long guide technology plays a crucial role; The double buffer system further improves the safety protection ability of the drill bit.

 

Comments:C10 products can be widely used in various construction scenarios such as municipal, super high-rise buildings, cross-sea bridges, water conservancy, etc., and the equipment efficiency has been greatly improved, which has effectively reduced the construction cost for customers and created *5655 value. It is worth mentioning that the C10 series products have been fully replaced with the national three emission engines, which are far ahead in terms of environmental protection, operability and safety.

SY500 T4f(US) self-tipping counterweight excavator

The new generation of Tire4f emission standard engine is aimed at the high-end market in Europe and the United States

In this Bauma exhibition, Sany Group showed the killer feature - a new generation of 50T Euro IV emission European and American high-end excavator SY500, which is Sany's existing * heavy tonnage excavator, which can be freely disassembled, the whole machine weighs 51688kg, and the high-end engine using Tire4f emission standard is adopted. In addition to meeting the strict environmental protection requirements of the European and American markets, it can also make the bucket have a digging force of up to 281kN, which can easily cope with extremely complex mining heavy-duty conditions. In addition, the mode selection and various safety signals are integrated on the display, which makes the operation more intuitive and convenient, and the electrically heated air suspension widened seat adapts to the needs of cold regions and improves comfort.

Comments:SY500 has made a number of innovative changes according to the rules and standards of European and American countries, and the free disassembly of the counterweight is a significant feature of the machine, which not only meets the transportation regulations of European and American countries, but also enables the heavy-duty excavator to carry out rapid transportation and transfer, which greatly improves the work efficiency.

SCC6500A crawler cranes

India alone has sold 12 super-selling wind power hoisting artifacts

SCC6500A is a new product this year, *5655 has a rated lifting capacity of 650 tons, which can be customized and upgraded according to the actual lifting load needs of customers.In India alone, 12 units of this product have been sold, and the market prospects are very impressive. On the day of the launch, the Thai agent held a signing ceremony with Sany on the SCC6500A.

The new generation of SCC6500A crawler crane has a compact structure, safe and reliable. Strong wind power hoisting capacity, with special wind boom for overlifting, can be customized and upgraded according to the actual hoisting load needs of customers. Without over-lifting wind power conditions, the lifting capacity of 108+12*5655 is 109t, and the lifting capacity of 114+12*5655 is 93.5t; With over-lifting wind power working conditions, the lifting capacity of 126+12*5655 is 101t, the lifting capacity of the special wind boom 126+12*5655 is 135t, and the lifting capacity of 138+12*5655 is 113t.

Comments: The new generation of SCC6500A crawler crane has a compact structure, safe and reliable. Strong wind power hoisting capacity, with a special wind boom for overlifting, can be customized and upgraded according to the actual hoisting load needs of customers, mainly for 130m 2-3kW wind turbine hoisting.